Results for Search: chamfer

N/a... More Info

For the removal of swarf and burrs from machined components leaving a clean hole. The 10.5mm diameter countersink is ideal when a chamfered edge is re... More Info

A pin guided tungsten carbide tipped cutter producing a 45° chamfer to a maximum depth of 10mm. Suitable for use on softwood, hardwood and all man-ma... More Info

Chamferbits are made from high speed steel.Three flute design for chamfering or de-burring tubes etc.Fitted to durable plastic handle.Diameter 12.4mm.... More Info

Chamferbits are made from high speed steel.Three flute design for chamfering or de-burring tubes etc.Fitted to durable plastic handle.Diameter 25mm.... More Info

  For bevelling and trimming plastic laminates, 45 deg angle with 16mm dia bearing.   D= 32mm L= 12mm S= 8mm (Shank)  ... More Info

  TCT Heavy Duty Chamfer Cutter By Titman Tip Tools.   The ideal heavy duty cutter for producing splay work. This cutter has a bottom cut... More Info

  For bevelling and trimming plastic laminates, 45 deg angle.   D= 25mm L= 12mm S= 1/4" (Shank)... More Info

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' j... More Info

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' j... More Info

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' j... More Info

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will g... More Info

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' j... More Info

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' j... More Info

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' j... More Info

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' j... More Info

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' j... More Info

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' j... More Info

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' j... More Info

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' j... More Info

Three flutes for extra fine finish. Ideal for newel posts and caps for stairs. Supplied with one bearing.. Dimensions: D1=34 mm Cut length=11... More Info

Ideal for newel posts and caps for stairs. Supplied with one bearing. Dimensions: D=35.1 mm C=12 mm C2=16 mm B=12.7 mm A=45 degrees Shank ... More Info

Adjustable trimmer will trim and bevel the top and bottom edges of the workpiece. The width of workpiece accommodated can be adjusted with spacers. ... More Info

This adjustable chamfer set can be used to produce chamfers on the top and bottom edges. The width of timber accommodated by the cutter can be vari... More Info

For veining, panelling, 'V' grooving, bevelling & chamfering. Dimensions: D=3/4 inch D=19.1 mm Overall length=70.5 mm A=60 degrees Shank Diame... More Info

For veining, panelling, 'V' grooving, bevelling & chamfering. Dimensions: D=3/4 inch D=19 mm C=9.2 mm A=45 degrees Shank Diameter=1/2 inch ... More Info